Crusher Run Gravel: What It Is and When to Use It in Florence, SC

L.H. Stokes & Son, Inc • September 16, 2026

Share this article

Crusher run is one of the most common materials at a landscape supply yard, and it is rarely the one people ask about by name. Contractors know it well. Most homeowners find it when they start planning a driveway base or a patio and realize they need something solid before the finish layer goes in.


Here is what it is, where it works, and how to figure out how much to order.

What Is Crusher Run?

Crusher run is crushed stone that has not been screened by size. When rock gets crushed, it comes out in different pieces. Screened gravel separates those pieces and sells them as uniform material. Crusher run skips that step. You get coarse chunks and fine stone dust together in one load.


The dust is what makes it worth using. It fills the gaps between the larger pieces. When you compact the material, those particles press in between the chunks and the whole layer binds together. That does not happen with clean, uniform stone.

Why It Compacts Better Than Most Gravel

Pea gravel rolls. River rock shifts under vehicle weight. Single-size crushed stone drains well but leaves gaps that stay open. Crusher run behaves differently because of the fine particles mixed in with the coarser pieces. Wet it down, run a plate compactor over it, and the dust locks everything in place. The layer goes dense and stays that way.


That is why it ends up under concrete, asphalt, and pavers. A base layer does not need to look like anything. It just needs to stop the surface above it from moving.

Where Crusher Run Works

It is not a surface material. No one uses crusher run for visible landscaping. But it is hard to beat for any job where the goal is a firm, compacted foundation before the finish layer goes in.


  • Driveway bases and residential parking areas before grading or paving
  • Under patios, walkways, and retaining walls before pavers go down
  • Job site roads and access paths where vehicles need stable ground
  • Utility trenches that need compacted backfill after the work is done
  • Graded or sloped areas where weight and bind matter more than appearance


If you need the material to look finished, use pea gravel, river rock, or decorative stone on the surface. Crusher run goes underneath. That combination keeps the surface layer from shifting.

How to Estimate How Much to Order

Depth depends on what is going on top and how much load it needs to carry. A standard residential driveway usually calls for four to six inches of compacted crusher run for the base. Commercial traffic or heavy equipment means going deeper.


For a rough estimate, multiply the length by the width of your area in feet to get square footage. For a four-inch base, plan on roughly one ton per 100 square feet. A six-inch base takes about 50 percent more material. When in doubt, round up. Waiting on a second delivery midway through a pour or a paver install costs more time than a small surplus ever will.

How It Compares to Other Options

Clean crushed stone drains fast and looks good at the surface. The uniform size leaves open gaps that do not compact. For drainage, clean stone is the right call. For base work, it is not.


Pea gravel and river rock stay loose on purpose. That quality makes them useful for paths and borders but rules them out as structural base layers. Do not use either one under anything load-bearing.


One thing to expect with crusher run: it can get muddy on the surface after heavy rain before it dries out. That is a trade-off for the bind. Once it dries and resets, the compaction holds. It is not a sign that something went wrong.

Get Crusher Run in Florence, SC

L.H. Stokes & Son, Inc stocks crusher run by the ton. We serve contractors and homeowners in Florence and the surrounding area. If you are working out the right depth or quantity for your project, give us a call or stop by. We can help you get the order right before work starts.


Contact L.H. Stokes & Son, Inc to check current availability and pricing.

Recent Posts

By L.H. Stokes & Son, Inc • October 16, 2026
If you are planning a new build, an addition, or a major landscaping project, site work in Florence, SC is usually the first job on the list. It happens before the foundation goes in, before the driveway gets poured, and before a single plant goes into the ground. Done right, it sets up every step that follows. Done wrong, it can cause drainage problems, settling, and delays that cost you time and money. At  L.H. Stokes & Son, Inc  , we have handled site work for homeowners, contractors, and commercial developers across Florence and the surrounding counties for over 85 years. Here is what site work actually involves, why it matters, and what to expect when you bring in a crew to handle it.
By L.H. Stokes & Son, Inc • October 2, 2026
If you are planning a landscaping project in Florence, SC, river rock is one of the easiest materials to work with. It drains well, it does not break down like mulch, and it gives your yard a clean, finished look.  L.H. Stokes & Son, Inc  stocks both white and brown river rock in large and small sizes, so you can find the right fit for your project without hunting around town. This guide covers what river rock is good for, how to pick between white and brown, how to lay it correctly, and how much you will need for a typical Florence yard.
By L.H. Stokes & Son, Inc • September 2, 2026
When you’re working on a project outside, the question comes up fast: do you need fill dirt or topsoil? They look similar when you’re ordering by the truckload. But they serve different purposes, and picking the wrong one will cost you time and money before the job is done. Here’s how to tell them apart and which one to order for your project in Florence.