Fill Dirt vs. Topsoil: Which One Does Your Florence, SC Project Need?

L.H. Stokes & Son, Inc • September 2, 2026

Share this article

New Title

When you’re working on a project outside, the question comes up fast: do you need fill dirt or topsoil? They look similar when you’re ordering by the truckload. But they serve different purposes, and picking the wrong one will cost you time and money before the job is done.


Here’s how to tell them apart and which one to order for your project in Florence.

What Is Fill Dirt?

Fill dirt is soil that comes from below the topsoil layer, usually removed during grading or excavation. It has little to no organic matter, which is exactly what makes it useful for structural work.


Common uses for fill dirt include:


  • Filling holes, sinkholes, and low spots in your yard
  • Grading land to improve drainage and redirect water
  • Building up ground elevation before laying a foundation
  • Leveling a site before paving, pouring concrete, or installing pavers


Because fill dirt is low in organic content, it stays stable over time. It does not break down and settle the way richer soil does. If you need the ground to hold a specific shape or support a structure, fill dirt gives you that solid, predictable base. That stability is the whole point.


One thing to watch: fill dirt with high clay content can restrict drainage and cause water to pond after rain. Ask about the source before you order and make sure it suits your site conditions.

What Is Topsoil?

Topsoil is the upper layer of earth, usually the top 5 to 12 inches. It is rich in organic matter, nutrients, and the biological activity that plants depend on. Good topsoil is dark in color, loose enough to work with a shovel, and easy to till or rake into shape.


You use topsoil when you need something to grow in:


  • Starting or expanding a garden bed
  • Seeding or sodding a new lawn
  • Topdressing thin or worn-out turf to bring it back
  • Building raised beds for vegetables, shrubs, or ornamentals


Topsoil supports root development. Fill dirt does not. If you are planting anything at all, you need topsoil on the surface layer. Grass and plants cannot establish in subsoil, and trying to push them through it wastes seed, sod, and labor.

Can You Use Both on the Same Project?

Yes, and for many yard and landscaping projects, that combination is the right call.


If you are filling a large low area or raising the grade across a section of your property, start with fill dirt. It is typically cheaper per yard and more stable as a base. Once you have the grade where you want it, add 4 to 6 inches of topsoil on top. That gives your lawn or plants a healthy growing layer without paying topsoil prices all the way down.


Landscapers and contractors around Florence use this approach regularly: fill dirt handles the volume, topsoil finishes the surface. It is the most cost-effective way to handle large-scale grading and planting in one job.

How to Decide Which One You Need

One question settles it for most projects: is anything going to grow there?


  • If yes, you need topsoil, at minimum as the top 4 to 6 inches of your finished surface.
  • If no and you are filling, grading, or building up ground for hardscape, a driveway, a pad, or a structure, fill dirt is the right material.


For most residential yard projects in the Florence area, the answer is often both. Fill dirt brings the site to grade. Topsoil gives the lawn or garden a place to take root.

Ready to Order? L.H. Stokes & Son, Inc Has Both

L.H. Stokes & Son, Inc carries bulk fill dirt and topsoil for projects of all sizes, from small backyard jobs to large contractor orders. We serve Florence and the surrounding communities within a 30 to 40 mile radius. If you are not sure how much you need or which grade fits your job, come in and talk to us. We can help you figure it out before you load up. Stop by today or give us a call.

Recent Posts

By L.H. Stokes & Son, Inc • October 16, 2026
If you are planning a new build, an addition, or a major landscaping project, site work in Florence, SC is usually the first job on the list. It happens before the foundation goes in, before the driveway gets poured, and before a single plant goes into the ground. Done right, it sets up every step that follows. Done wrong, it can cause drainage problems, settling, and delays that cost you time and money. At  L.H. Stokes & Son, Inc  , we have handled site work for homeowners, contractors, and commercial developers across Florence and the surrounding counties for over 85 years. Here is what site work actually involves, why it matters, and what to expect when you bring in a crew to handle it.
By L.H. Stokes & Son, Inc • October 2, 2026
If you are planning a landscaping project in Florence, SC, river rock is one of the easiest materials to work with. It drains well, it does not break down like mulch, and it gives your yard a clean, finished look.  L.H. Stokes & Son, Inc  stocks both white and brown river rock in large and small sizes, so you can find the right fit for your project without hunting around town. This guide covers what river rock is good for, how to pick between white and brown, how to lay it correctly, and how much you will need for a typical Florence yard.
By L.H. Stokes & Son, Inc • September 16, 2026
Crusher run is one of the most common materials at a landscape supply yard, and it is rarely the one people ask about by name. Contractors know it well. Most homeowners find it when they start planning a driveway base or a patio and realize they need something solid before the finish layer goes in. Here is what it is, where it works, and how to figure out how much to order.